Note that the /s silent parameter has been replaced by /qb in the syntax. I must deploy Visio Viewer 2003 on my network and I must deploy it without user intervention. I downloaded the viewer, vviewer.exe. After running a test installation, I found vviewer.msi. In a normal installation (for example. B, by double-clicking the .exe or .msi file), the user must check a box to accept the EULA and click Finish when everything is finished. We don`t want users to have to. On a test computer, I ran the silent installation command (msiexec.exe /i vviewer.msi /quiet). Nothing happened.
I ran the passive installation (msiexec.exe /i vviewer.msi /passive). The installation bar appeared and disappeared immediately. I ran the same command with logging (msiexec.exe /i vviewer.msi /passive /l log.txt). === Logging started: 21.06.2006 09:06:47 ===Start of action 9:06:47: INSTALL. The action starts at 9:06:47: VerifyUnicodeInstallPathNameOk.The action ended at 9:06:47: VerifyUnicodeInstallPathNameOk. Return value 1.Start of action 9:06:47: AppSearch.End of action 9:06:47: AppSearch. Return value 1.Action start 9:06:47: SetOfficeProps.Action completed 9:06:47: SetOfficeProps. Return value 1.Action start 9:06:47: LaunchConditions.Action completed 9:06:47: LaunchConditions. Return value 1.Action start 9:06:47: ConfirmEULA.MSI(s) (6C– View image here: cdn.arstechnica.net/forum/smilies/biggrin.gif –8) [09:06:47:541]: Product: Microsoft Office Visio Viewer 2003 — The EULA was not accepted. The EULA was not accepted. The promotion ended at 9:06:47 a.m.: ConfirmEULA. Return value 3.Action completed 9:06:47: INSTALL.
Return value 3.MSI(s) (6C– See image here: cdn.arstechnica.net/forum/smilies/biggrin.gif –8) [09:06:47:541]: Product: Microsoft Office Visio Viewer 2003 — Installation operation failed.=== Logging stopped: 2006-06-21 09:06:47 ===It appears that user *must* accept the EULA before installation. But this thwarts the purpose of a silent installation. Is there a way around this problem? An installation flag or transform file indicating that the EULA has already been accepted? Or will I just have to start an interactive installation on all computers? Any help you can offer would be greatly appreciated. After installing Kaspersky Endpoint Security, the trial license is activated, unless you have specified an activation code in the installation file.ini. A trial license usually has a short duration. When the trial license expires, all Kaspersky Endpoint Security features are disabled. To continue using the app, you must activate the app with a commercial license using the App Activation Wizard or a special command. Before installing the app in unattended mode, please open and read the End User License Agreement and the text of the Privacy Policy. The End User License Agreement and the text of the Privacy Policy are included in Kaspersky Endpoint Security. You may only install the Application if you have fully read, understood and accepted the terms and conditions of the End User License Agreement, if you understand and agree that your data will be processed and transferred in accordance with the Privacy Policy (including to third countries), and if you have read and understood the Privacy Policy in its entirety. If you do not agree to the terms and conditions of the End User License Agreement and Privacy Policy, please do not install or use Kaspersky Endpoint Security.
This is an MSI installer that must run and accept a license agreement on the first page and then run the content. Can this be done unattended? I`m trying to silently install a file .msi in C# without requiring user input. I`m having trouble bypassing the license agreement so that the installation can continue. Is there a way to adopt an argument so that the agreement is accepted without imputing a user? What should be the syntax of the cmd installation so that it does not ask for license acceptance or how to pass yes with the command so that it can be installed without popup? To apply the settings for the setup.ini, install.cfg, and setup.reg files, place these files in the folder containing the kaspersky Endpoint Security distribution package. You can also place the setup.reg file in another folder. When you do this, you must specify the path to the file in the following application installation command: SETUPREG=. I`m trying to install an app in Windows 7 using cmd. during installation, it appears for the user license and contract and I have to accept it for later installation. I used /S with the .exe file, but the license window still appears. I try to install “wget” for Windows: gnuwin32.sourceforge.net/packages/wget.htm disable checking for incompatible software. The list of incompatible software is available in the incompatible file.txt included in the distribution kit. If no value is set for this parameter and incompatible software is detected, the installation of Kaspersky Endpoint Security is stopped.
I try something like this for installation with cmd: To tacitly accept the license agreement starting with IBM Installation Manager version 1.1.2, you need to set the `acceptLicense` attribute of the `agent-input` element in the answer file to `true`. For example, . Setup.exe: You can also create a WiX Burn bundle (see link for code mockup) or use another tool to create a configuration.exe that installs your original app and then other components one by one – so there`s nothing to trigger to install it from the app. For the installation command and options, it must be published by the software manufacturer. You can try wget.exe /? or wget.exe /help in a cmd to get the help windows that normally display all accepted configuration settings. You can also visit the website of the app provider. Usually, you will find installation instructions in the support area that contain the accepted settings. I also gave up the /journal option. It does not exist as an option for VS2017, although if you still need to get the installation logs, they have a way to get them. Unattended installation attempts result in the following error: You must accept the license agreements for the package . If none of the above points work, it means that the installation EXE file was developed in a poor practice of unattended installation and settings support. Unfortunately, a lot of time is going on.
DTF: Now, the code response. There is a component installed with the WiX toolkit called DTF – Desktop Tools Foundation, which has a number of C# classes designed to handle MSI files through managed code. This answer explains which file to add as a reference in Visual Studio and briefly describes the different DTF files/assemblies. Another example of DTF. Some digressions and suggestions first: MSI can be installed via msiexec.exe commands, Powershell, DTF C# (see below), WMI, MSI API (COM, Win32). Powerbi msi accepts “ACCEPT_EULA=1”. You can try it if all else fails for Visual Studio 2017. Batch: Why not just install with a normal batch file? The /QN switch bypasses the entire sequence of the installation GUI and there should be no need to accept license agreements. MSI logging information (short version: Open the log and search for “value 3” to find errors). Caution: I would avoid triggering the installation of the software from an application binary – unless you are creating an actual installation launcher application.
This may work, but it can cause serious problems with antiviruses and malware scanners. I`ve seen that before. I assume that you will also need to run elevated administrator privileges to start your installations (per-machine installations). In addition, it is possible that the installation exe files also accept the msi: AGREETOLICENSE” or “ACCEPTEULA” parameters are the ones you are interested in. After making these changes, VS2017 was successfully installed without having to accept the terms manually. he didn`t take the options because I –. I also added .exe to the executable for the sake of the completeist. This technical note explains why unattended installation attempts with IBM® Installation Manager result in the error []You must accept the package license agreements[] and provides instructions on how to resolve the problem. Interactive installation: If you want to install with user interaction, you can find the property that controls the acceptance status of the license agreement and set it to the appropriate value (usually 1) to display the accepted license. Is it possible to run an application and make it accept the configuration steps, i.e. agree on the license agreement and launch it automatically with cmd.exe or PowerShell? In fact, REPACKAGING in MSI is my job, so I have Wise and InstallShield here on my computer. — See the image here: episteme.arstechnica.com/groupee_common/emoticons/icon_smile.gif — I downloaded Visio Viewer 2003 and took a look at the MSI — You need to add two rows to the properties table.
ACCEPTEULA = 1ASSOCIATE = 1 (this maps the file extension)(Make sure both property names are all written in uppercase!) Then you should be able to run this command and install it without any problems:msiexec /i vviewer.msi /qb! Usually, you can simply add ACCEPT=YES to the command line and it will work.. .
